Nanocyn® Advanced · ARTG listed
Kills viruses in as little as 15 seconds.
As listed on the ARTG. Follow the label.
A hospital-grade disinfectant, sanitiser and cleaner for hard, non-porous surfaces. Based on neutral oxidised saline. Ready to use, straight from the bottle. Shown with the MicroSafe Automated 360, the wheeled application device.
Real product photo of the MicroSafe 360. Mist effect and industry scenes are illustrative.
Operate to the manufacturer's instructions. Claims apply to the disinfectant, not the device.
Kills viruses fast
SARS‑CoV‑2 (COVID‑19): 15 secondsNorovirus (gastro), Herpes Simplex and Poliovirus: 30 secondsAs listed on the ARTG. Follow the label.
No PPE needed
Protective equipment is not required under normal conditions of use. See the SDS.
Neutral pH
Neutral pH with a minimal, faint chlorine odour.
Not hazardous
Not classified as hazardous under the model WHS Regulations and GHS.
The chemistry
Nanocyn Advanced is a neutral oxidised saline. Its Safety Data Sheet lists the solution with available chlorine at 0.026% w/w, which is 260 ppm, with water making up the balance.
The result is a clear, colourless liquid with a neutral pH and only a minimal, faint chlorine odour. It is not classified as hazardous under the model WHS Regulations and GHS.
See the SDSWhy switch
How Nanocyn Advanced compares with typical bleach, quaternary ammonium (quats) and alcohol based products. Nanocyn Advanced facts are from its SDS and label. For any other product, check its own label and SDS.
Hospital-grade and ARTG listed. Always read the label and use as directed.
What Nanocyn Advanced is
Nanocyn Advanced is a hospital-grade disinfectant for hard, non-porous surfaces. It is ready to use, applied undiluted and as directed on the label, with no mixing or dilution.
It has a minimal, faint chlorine odour. Apply it by wipe, spray, handheld mister or the 360 Machine as the label directs, then let it air dry or wipe dry with a clean cloth.
One product for gyms, aged care homes, offices and commercial kitchens.
Key benefits
As listed on the ARTG. Follow the label.
Ready to use and undiluted. No mixing, no measuring. Just use as directed.
A hospital-grade disinfectant for hard, non-porous surfaces. ARTG listed.
Keep surfaces wet for the 10 minute contact time for fungi and mould.
Air dry or wipe dry, as the label directs.
Washrooms, benches, rails, handles, desks and gym kit, all on one routine.
Apply with the 360 Machine or the handheld mister. Operate it to the manufacturer's instructions. Claims apply to the disinfectant, not the device.
Sectors
30 Sep 2026 · Australian Commission on Safety and Quality in Health Care
The Commission's guidance hub, including the Australian Guidelines and aged care resources, was last updated on 30 September 2026. Useful reading for site cleaning protocols.
Read the source →1 Dec 2026 · Safe Work Australia
Safe Work Australia's Hazardous Chemical Information System has been updated for the move to workplace exposure limits, which take effect on 1 December 2026. Check your chemical registers and SDS.
Read the source →3 Aug 2026 · Therapeutic Goods Administration
The TGA's advertising pages, including guidance on applying the Advertising Code and social media rules, were last updated on 3 August 2026.
Read the source →These posts are general industry information and research summaries. They are not product claims.
All news
